GROWLOFT planter with legs and a drip tray

  • 6.00
A hand lifting the fluted planter to reveal drainage holes, showing a white drip saucer nested on a wooden stand.
A minimalist white fluted planter holding a green plant on a wooden stand against a textured white wavy background.
A white fluted modern planter holding a green plant, sitting on a wooden interlocking four-legged stand.
A hand lifting the fluted planter to reveal drainage holes, showing a white drip saucer nested on a wooden stand.
A minimalist white fluted planter holding a green plant on a wooden stand against a textured white wavy background.
Invented bySimona - simiu3d

Simona - simiu3d

View store

Description

GROWLOFT is a minimalist and modern planter with a stand and a drip tray. The file gives you 2 options: For fully 3D printed model or for a laser cut stand. 3D print: No supports or special settings needed. To avoid leaking, use PETG or ASA and increase the flow rate to 1.02, lower the layer height, slow down and use a scarf seam. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another. Laser cut: Use the 4 mm thick plywood. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another.

$3.00 / month

GROWLOFT planter with legs and a drip tray

  • 6.00
Invented bySimona - simiu3d

Simona - simiu3d

View store

Description

GROWLOFT is a minimalist and modern planter with a stand and a drip tray. The file gives you 2 options: For fully 3D printed model or for a laser cut stand. 3D print: No supports or special settings needed. To avoid leaking, use PETG or ASA and increase the flow rate to 1.02, lower the layer height, slow down and use a scarf seam. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another. Laser cut: Use the 4 mm thick plywood. There are 2 options for the base - use the one named more clearance if the parts are too tight and can not be inserted into another.

$3.00 / month