STRAMEL pen holder with a planter set

  • 6.00
Top-down view of a white ribbed 3D printed pen cup showing a brown protective insert on the bottom.
A modern minimalist 3D printed desk set with a white ribbed pen holder and succulent planter on a beige tray.
A modern 3D printed desk set featuring a white ribbed pen holder and mini planter with a succulent on a beige tray.
Close-up of a white ribbed 3D printed mini planter containing a succulent, resting on a beige tray.
A person holding the bottom of a brown 3D printed planter insert showing several drainage holes.
Invented bySimona - simiu3d

Simona - simiu3d

View store

Description

STRAMEL is a modern, minimalist desk set that combines a pen holder, a mini planter, and a sleek tray into one cohesive design. The planter fits small plants up to 6 cm in diameter and includes a built-in drip tray, allowing for direct planting into the 3D-printed insert. The full tray measures 224 mm in length and requires a minimum build plate of 200x200 mm (diagonally). It's optimized for printing with a 0.4 mm nozzle and performs well even at a 0.28 mm layer height. For optimal material efficiency, a Gyroid infill as low as 4% is recommended. To keep the pen holder clean—especially when printed in light colors—a small protective insert is included for the bottom, preventing marks and dirt from pencils. Please note: the model should not be scaled down, as the fine lamel structure relies on the original thickness to print correctly. A small SIMIU logo is subtly placed on the bottom of the tray.

$3.00 / month

STRAMEL pen holder with a planter set

  • 6.00
Invented bySimona - simiu3d

Simona - simiu3d

View store

Description

STRAMEL is a modern, minimalist desk set that combines a pen holder, a mini planter, and a sleek tray into one cohesive design. The planter fits small plants up to 6 cm in diameter and includes a built-in drip tray, allowing for direct planting into the 3D-printed insert. The full tray measures 224 mm in length and requires a minimum build plate of 200x200 mm (diagonally). It's optimized for printing with a 0.4 mm nozzle and performs well even at a 0.28 mm layer height. For optimal material efficiency, a Gyroid infill as low as 4% is recommended. To keep the pen holder clean—especially when printed in light colors—a small protective insert is included for the bottom, preventing marks and dirt from pencils. Please note: the model should not be scaled down, as the fine lamel structure relies on the original thickness to print correctly. A small SIMIU logo is subtly placed on the bottom of the tray.

$3.00 / month