Description

The "Bubbling Brew" Cauldron Lamp 🔮 Most printable cauldrons are either a solid decoration or a tea-light holder - a candle in a bucket. I wanted the brew itself to glow, and to look like it was actually bubbling. So this one comes apart. The lid lifts off, a color-changing puck light drops into the pot, and a printed disc covered in domed bubbles rests on top to diffuse it. Every bubble lights up from underneath. 🟩 𝗧𝗛𝗘 𝗟𝗜𝗚𝗛𝗧 (𝗦𝗢𝗟𝗗 𝗦𝗘𝗣𝗔𝗥𝗔𝗧𝗘𝗟𝗬) Built around a standard round RGB LED puck light - 59.5 mm across and 8.3 mm tall, the kind sold in 3-packs with a 24-key remote for about $20. Aluminum housing, USB powered, with an inline switch on a 1.5 m lead. 16 colors and 4 gradient modes. The LIGHT changes color, not the print. The insert is a white diffuser, so whatever you set on the remote, the brew follows. One 3-pack lights three cauldrons. Set the puck in the bottom of the pot, run the lead out under the rim, and rest the insert on top. Any puck up to 59.5 mm across and 8.3 mm tall will drop straight in - there is room to spare, so smaller is fine. Much taller and it will lift the insert.